VIGA কল প্রস্তুতকারক 
Shower heads have become a necessity for every household, but how much do you know about shower heads? Although it has brought convenience to countless families, many people still lack knowledge about it, such as not knowing how its installation procedure is. Today VIGA will popularize the common sense of how to install shower heads.
1, How to install the shower head
প্রথম, pay attention to the choice of installation location. Avoid visible locations such as windows or doors to ensure concealment when using shower heads. The second is to pay attention to the identification of the water outlet. The standard shower’s water outlet is left hot and right cold, which is indicated by a color mark at each end, red for hot water and blue for cold water. Be sure to do two when installing. Identification. The third is to pay attention to the installation height. The shower head is shared by the family. When installing, the height of the family members must be considered to determine the appropriate installation height.
2, The specific steps of how to install the shower head
প্রথম, find the proper position of the eccentric head before installation, and connect it to the outlet pipe. The distance between the two must be well grasped, generally 15-20cm away. Secondly, the shower body and the water outlet hose are assembled and connected. During the assembly, a raw material tape is wound around the thread interface to prevent water leakage in the future, and then the shower head is connected to the water outlet and fixed with screws. পরবর্তী, connect the nozzle rod and the faucet together, and then install it on the eccentric joint. After the installation is completed, check the seal between the nut behind the faucet and the eccentric head, and be sure to seal it. Finally, install the sprinkler, install it on the top of the shower rod, and then use a stainless steel hose to connect the main body of the faucet and the shower sprinkler to form a collusion. After all the steps are completed, you can try it out, check the seal of each connection, and confirm that there is no water leakage. If there are problems, rework and adjust in time.
After reading the common sense of how to install the shower head, have you learned it?
