VIGA teaches you how to deal with the problem of ceramic basin cracking

Dandanes, the basin in the family is an indispensable item, and ceramic basin is loved by many families to use because of their generous appearance. But what about cracks in ceramic basins in daily life? Let’s talk about this situation how to deal with it.

1. The crack is not obvious
If the crack in the ceramic basin is not obvious, it means that its crack does not affect the use of the ceramic basin at all, then we can handle it with a simpler method. We can add a little vinegar to the salt and then use a cotton swab to fill the mixture. Then rub the place where there is a crack in the door, so that the crack will become lighter and thinner until it disappears. Vendar, the premise of this method is that the crack is relatively small and does not affect the use of the ceramic basin at all.

2.the crack is obvious and affects the usage
V tem primeru, we need to repair the crack. There are two ways to repair, one is simpler to apply with glass glue. The specific operation is to glue the glass into the cracked gap, so that when the glass glue is solidified, the gap is blocked, thereby preventing the water from flowing out. Vendar, in the operation, care should be taken not to make the glue everywhere, thus affecting the overall appearance. Zato, it is not suitable for families with high requirements. One is a more professional method of repairing with a repair agent. This is a more professional repair method, especially for ceramic basins. The specific method of operation is as follows: First, the inside and outside of the basin should be cleaned. Be careful not to leave any residue. Otherwise, it will affect the repair effect very much, and then use a sander to polish the area that needs to be repaired. The rougher the grinding, the better. Then clean the polished part with alcohol. Be careful not to use your hands. Affect the repair effect. Finally, the base material and the curing agent are mixed and applied in proportion. During the application process, the air bubbles must be cleaned and then solidified for a while. This patching process is complete. You can tap the entire basin and check the curing effect.

The ceramic lavatory is easy to accumulate dirt when used for a long time. You can use the sliced ​​lemon to scrub the surface of the lavage. After a minute, rinse it with water to make it bright. If the stain is more stubborn, use a safe bleach, pour it into the basin for 20 minut, then wash it with a towel or sponge, then rinse with water.