VIGA ონკანის მწარმოებელი 
Setup, the faucet must attempt to not bulge with things that are hard, don’t cement, adhesive and other items left on the outside, in order to not damage the surface coat shine. If your faucet is utilized in a new home since the water distribution network is recently laid, there’ll definitely be sand and other impurities from the water, prior to setup, look closely at the elimination of debris from the gut, a while to place water before the water quality gets evident before installing the faucet. 2, don’t start using excess power to cause artificial harm, gently turn the tendency can be. Even conventional faucets do not have to be screwed to death much work. 3、The surface of this faucet must be wiped clean following the usual usage. 4, in the event of water pressure, isn’t less than 0.02mpa, following a period of usage, in the event the water output is found to be decreased, or perhaps the occurrence of water heater fire out, then cut off the cold and hot water leak, use a wrench in the faucet socket to gently unscrew the spout display cap, clean impurities and then carefully set up, normally could be restored as before. 5, tub faucet lotus head metallic hose ought to be kept in a pure stretch, don’t use it when sprinkled around the tap. At precisely the exact same time, when using or not using, look closely at the valve and hose body joints don’t shape dead ends, in order to not crack or damage the hose.As a professional manufacturer of faucets, Viga always attaches great importance to quality control, and this article is a professional advice for bathroom faucets maintenance for factory technicians, გთხოვთ დაგვიკავშირდეთ!