Produttore di rubinetti VIGA 
“Why did I replace the entire faucet and it was still leaking? There is a problem with your faucet! I want to return it!!” Losing money, losing money, losing money, important things are said three times, all kinds of complaints require compensation! Many times, the bathroom terminal The sales store is also very wrong. I am a regular specialty store. Why should there be any problems?
In fact, sometimes the water leakage of the faucet has nothing to do with the faucet itself. It may be caused by improper installation of the water hose and the faucet body. In addition, it may also be caused by problems such as aging, unstable water pressure or corrosion of the water supply hose that supplies water to the faucet. Once the water hose is cracked or burst, the consequences will be serious. Perciò, experts recommend checking or replacing the water hose every 1-2 anni.
Why does the faucet leak?
Most people think that the faucet leakage is a problem with the valve core. In fact, as long as the valve core is used properly, the valve core is not prone to problems. Perciò, if the faucet leaks, it should be analyzed from its essence.
— 【1 】—Water will drip after the new faucet is closed
After the new faucet is closed, dripping will appear. In such a situation, most owners will think that this is a problem with the faucet valve core. In fact, the water dripping for a few seconds after the new faucet is closed is caused by the remaining water in the cavity after the faucet is closed. This is normal. But if the water is ticking for a long time, it is a faucet problem.
— 【2 】—Poor water quality
Many people don’t understand, what is the relationship between poor water quality and a leaking faucet? In fact, poor water quality will cause trash to accumulate in the valve core, which can easily cause the valve core to not close tightly.
— 【3 】—Scratch on tap spool
During use, the valve core is scratched due to the abrasion of foreign hard materials. For example, when the water supply pipe is broken and the water is re-emerged, the water may contain rust or sand particles, which may cause the surface of the valve core to be scratched during the opening and closing process. Sealed and leaking. Perciò, when installing the faucet, be sure to clean up the impurities in the water pipe.
— 【4 】—Pipeline connection
The water inlet hose and the main body of the faucet leaked due to improper installation.
Uncover the cause of the leaking faucet and prescribe the right medicine!
— 【1 】—The faucet still leaks water after the valve core is closed
This phenomenon may be caused by the loosening of the pressure cap causing the valve core to become loose and unable to seal the water. The solution is to remove the handle and decorative cover, and tighten the pressure cap again. Another possibility is that the rubber ring at the bottom of the valve core is deformed. Can not seal the water, the solution is to take out the valve core, check the bottom rubber ring, reset it and reinstall it.
— 【2 】—Water seeps from around the valve core
This phenomenon may be that the spool is loose or displaced. The solution is to remove the spool and install it again.
— 【3 】—Water seeps from the middle part of the valve core
This phenomenon is that the valve core is damaged. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which will inevitably increase maintenance costs.
— 【4 】—Water leakage at the bottom of the faucet
This phenomenon is generally caused by the O-ring of the water inlet pipe not being installed or deformed. The solution is to unscrew the hose. If the O-ring is not deformed, re-fit the O-ring and the water inlet pipe. Yes, if you find that the O-ring has been deformed, replace the O-ring.
What should I do if the faucet leaks?
— 【1 】—The push-type faucet leaks
Step 1. Close the water inlet valve. Remove the small screws on or behind the faucet handle to remove the handle fixed on the faucet body. Some screws are hidden under metal buttons, plastic buttons, or plastic sheets, which snap into or screw into the handle. As long as you turn on the button, you will see the handle screw on the top.
Step 2: Remove the handle and check the parts of the faucet. Use large slip joint pliers or an adjustable wrench to remove the packing nut, being careful not to scratch the metal. Turn the spool or shaft in the same direction as when you turned on the faucet to unscrew them.
Step 3: Remove the screws holding the washer. If necessary, use penetrating lubricant to loosen the screws. Check the screws and valve core, and replace them if they are damaged.
Step 4: Replace the old washer with an identical new washer. New washers that almost exactly match the old washers generally keep the tap from dripping. You should also pay attention to whether the old gasket has a bevel or flat, and replace it with the same new gasket. A gasket designed only for cold water will swell violently when hot water flows through it, blocking the water outlet and slowing down the flow of hot water. Some gaskets can work in both hot and cold water, but you should make sure that the replacement gasket you buy is exactly the same as the original one.
Step 5: Fix the new gasket to the valve core, and then reinstall the parts in the faucet. Rotate the spool clockwise. After the spool is in place, reinstall the packing nut. Be careful not to scratch the metal with the wrench.
Step 6: Reinstall the handle and put the button or disc back. Turn on the water supply again and check for leaks.
— 【2 】—Water tap leakage caused by the sealing ring of the tap
Dripping occurs when the faucet is closed; water leakage occurs when there is water flowing through the faucet. If you see water pouring from around the handle, your faucet is leaking; the first thing to do is to make sure the packing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrench.
If you find that the cause of the water leakage is not the loose nut, then you need to replace the sealing ring. The sealing ring of the faucet can be a tight sealing ring composed of one or more O-shaped rubber rings, or it can be something like a string or soft metal wire wrapped around the valve core under a packing nut.
— 【3 】—Water leakage caused by valve seat of faucet
If you change the gasket and the faucet still drips, then there may be a problem with the valve seat of the faucet. A damaged gasket may cause the valve seat of the faucet to be worn out by the metal valve core and become uneven, or the deposition of chemical substances in the water may form a residue, which prevents the gasket from being completely compressed with the valve seat.
Steps: Insert the valve seat tightening wrench into the valve seat, and then turn it counterclockwise. Once you remove the old valve seat, make sure that the new valve seat you bought is exactly the same as the original one. If the seat cannot be removed, insert a seat cover that can slide into the proper position of the old seat and provide a seal. Two types of valve seat rollers or sanders that can flatten worn valve seats.
— [4]—The O-ring of the faucet causes the faucet to leak
The faucet in the kitchen has one or more O-rings to prevent water from gushing around the outlet. If the O-ring is worn out, you will see water flowing out of the bottom of the outlet every time you turn on the faucet.
Step 1: Turn off the water supply, turn counterclockwise and remove the threaded coupling nut that fixes the water outlet. Be sure to wrap the nut with tape to prevent it from being scratched by pliers or wrenches.
Step 2: After removing the coupling nut, lift the water outlet up and take it out of the water outlet seat. You can see these rings in the water outlet seat.
Step 3: Replace the problematic ring with a new one of the same size. Reassemble the faucet.
What aspects should be paid attention to in the faucet?
◆What should be paid attention to when repairing water tap leaking?
If you repair it yourself, the first thing is to turn off the water supply. Just turn off a water supply valve near the faucet to turn off the water supply, but if the house is not equipped with a water supply valve for every faucet, you have to turn off the main water supply valve to shut off all water supply.
◆How to use the faucet correctly?
Some citizens like to tighten the faucet every time they run out of water, thinking that this will prevent water leakage. In fact, the correct use of the faucet should be as light as possible to close and open as much as possible, do not vigorously rotate the faucet knob repeatedly, and should not turn the faucet too tight. In addition, the faucet should try not to hit hard objects. For the use of bathtub faucet, the metal hose of the shower head should be kept in a natural stretched state. Do not coil it on the faucet when not in use. When in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damage. hose.