Do Not Say It Is A Quality Problem When The Toilet Leaks! After Understanding This Knowledge, If You Encounter The Problem of Leaking Toilet, Please Review And Check First!
The problem of leaking toilets appears so frequently that one has to mention it. If very accidentally encounter toilet leaks, how to do it? Don’t worry, there are no more than the following reasons for toilet leaks. Try it yourself and it won’t hurt to find the right remedy for the problem.
What Is The Cause Of Toilet Leaks?
1, Inferior Material: some manufacturers are bent on reducing production costs. The choice of inferior materials causes the outlet of the inlet valve and the inlet pipe itself to crack when re-injection. This will lead to sealing failure. The water in the tank flows into the toilet through the overflow pipe of the drain valve, resulting in a “long flow”.
2, Excessive Pursuit of tank accessories miniaturization resulting in floating ball (or floating bucket) buoyancy is not enough. When the water submerged a floating ball (or floating bucket), it still can not make the water inlet valve close. The water keeps flowing into the tank, and eventually flows into the toilet from the overflow pipe and causes toilet leaks. Especially when the tap water pressure is high, this phenomenon is particularly obvious.
3, Improper Design: this makes the tank fittings in the action of interference, resulting in leakage. For example, when the water tank is released, the float and float rod fall and thus affect the normal reset of the flap, thus causing leakage. If the float rod is too long and the float ball is too large, this will cause friction with the tank wall, thus affecting the free lift of the float ball and leading to seal failure and leakage.
4, The Drainage Valve Is Not Sealed at each connection. Under the action of water pressure, the non-disposable formed drainage valve caused by poor sealing at the joint will cause water to flow into the toilet through the overflow pipe from the interface gap, which will result in leakage. You can freely change the height of the lift-type water inlet valve. If its seal is not tightly matched with the pipe wall, it will also often leak.
5, The Toilet Installation is not installed, resulting in the ground sewage port and the toilet sewage caliber is not aligned. This will have yellow water, water and odor out. Installation is not professional, did not install the flange (flange has a very good fixed and overflow prevention role).
6, The Long-Term Use Of Suitable into the toilet and ground loosening.
Check The Cause Of Toilet Leaks And Solve
1, open the water tank and find that the tank is full of water. The water flows out from an overflow pipe, which means that the water inlet group is bad. If you hear the sound of water coming into the tank for no reason, it proves that the water outlet group is bad. This will need to repair or replace by the water inlet group or water outlet group.
2, after the toilet flush, if the leakage occurs from the bottom of the toilet seat, and is accompanied by an odor, then it can be determined that the seal between the drain and the toilet seat at the bottom of the toilet is not good enough. This will need to re-play sealant.
3, the drainage pipe is not smooth so the dirt backflow. When you deal with this situation, it is necessary to determine whether the drainage pipe is not smoothly caused by. If it is caused by the poor drainage pipe, you need to let the product seller to re-install the toilet. This situation is generally found soon after the toilet was installed.
4, if the surface of the toilet has water seepage, it is possible that the toilet itself has cracks. The detection method is very simple: first turn off the water inlet valve, followed by emptying the toilet tank water. Then add red ink or ink to the residual water tank and wait 30 minutes. Observe where the water is seeping. In this case, it is not recommended to repair the toilet seat. Changing the toilet seat is the only way.
How To Solve The Problem Of Toilet Leakage?
The common cause of water leakage from flush toilets is due to the lighter hemispherical rubber cover that seals the drainage opening. The water tank leaks because the gravity is not tight enough when it falls after the water is released. You often need to repeat repeatedly to cover tight. The way to deal with this is to connect the rubber cover on the connecting rod bundled with little heavy things, such as large nuts, toothpaste skin, etc. Note that the bundle should be as close as possible to the rubber cover so that the rubber cover is relatively easy to cover the drainage port, and the leakage problem is handled.
1, confirm that the water inside the tank is installed correctly and closely. You can use glass glue to close the junction part of the bottom of the water inlet and the water tank. The bottom of the flush piece is also treated in the same way.
2, make sure that the rubber ring at the connection between the water tank and the toilet body has enough elasticity, and the water tank is connected to the toilet body tightly enough.
3, apply neutral glass glue to the rubber ring between the water tank and the toilet body.
4, before the construction of glass glue, please dry the glue application part (absolutely dry). After the construction, it is best to keep 24 hours without water.
If the internal parts of the water tank are aging, it is necessary to replace the parts quickly. If there is a toilet leak at the connection between the toilet and the downpipe, you need to reinstall the toilet and reseal the toilet. If the toilet itself has cracks that cause toilet leaks, it is best to replace it with a new toilet. If there is a problem with the inlet and outlet groups of the toilet, you need to open the tank and check it. When you see the tank overflowing and water coming out of one of the pipes, it indicates that the inlet group is broken. If you hear the sound of incoming water, it proves that the outgoing water group is bad. If the tank is leaking, you can take off the downspout core and clean the scale. If there is still a toilet leak, you will need to change the toilet.
How To Solve The Problem Of Leaking Toilet Tank?
First of all, open the toilet tank to check. Let’s see what level that scoop inside the tank is at when it is full of water. If the water inside is full and the tank is still feeding water, then it will definitely leak.
We use water to pull up and down the ladle’s card position to see how sensitive the ladle is. If there is not smooth or difficult to move, then it also proves that the water scoop equipment is faulty. Remember to press the position of the scoop a little, not too high.
You can take off the scooping device and clean it. If you do not know how to remove it, just put dry water in the tank. Use detergent or washing powder to clean once to try. If this can solve the leak, continue to use the toilet. If it doesn’t work, it needs to be replaced.
Check the connection of the stainless steel hose outside the tank to see if it is not tightened or if the internal gasket has deteriorated causing a leak. This must be identified.
If the internal equipment is fine, then you also need to check whether the toilet tank has a cracking problem caused by the impact. If there is an external force, the tank may also have a toilet leak.
How To Solve The Problem Of Water Leakage From The Small Hole Of The Toilet Base?
1, confirm that the water tank internal water parts are installed correctly and closely. It can be closed with glass glue at the bottom of the water inlet and the junction part of the tank. The bottom of the flushing piece is also treated in the same way.
2, confirm that the tank and the toilet body connection of the rubber ring is flexible enough, and the tank and the toilet body connection is tight enough
3, apply neutral glass glue to the rubber ring between the water tank and the toilet body.
4, before the construction of glass glue, please dry the glue application part. After construction, it is best to keep 24 hours without water.
Nowadays, because of silicone, many toilets are installed without using expansion bolts to fix them. They are fixed and sealed directly with silicone which has a strong bond. Sealing with putty for a long time will harden and cause cracking and leaking. If the silicone is not sufficiently cleaned before bonding, it is also easy to produce local leakage.
If you are sure that the toilet is not cracked, then simply remove the dirt from the bottom of the toilet and the floor tile at the joint and dry it. Then apply a ring of silicone to seal it. Remember that you need to stop using the toilet for one night.