How to clean and maintain the faucet

Netizens who are familiar with faucet products must have heard the phrase, “The surface of the product is chrome-plated, strong corrosion resistance, no rust, easy to clean, beautiful and durable, and lasting as new.” Donc, many people think that high-end faucets can be used no matter how long they are used. Maintain a bright luster. But when you install the faucet, after a period of time, you will find that water stains are easy to remain on the surface of the faucet. After the water stains are dried, they will form very ugly spots. If they are not cleaned for a period of time, even if the faucet is high-end, it will become Faint, so we must clean and maintain the faucet frequently. Let’s take a look at the faucet “how to clean and maintain” with the editor of China Faucet Industry Network. 1. Faucet cleaning method 1. If it is a copper faucet, if you want to clean the electroplated surface, you can use boiling water and detergent to scrub, or you can directly use some strong degreasing detergent to clean. 2. The scale, rust, etc.. on the faucet, just wipe the surface with a damp cloth or sponge dipped in a special detergent, then wipe dry with a clean cloth or rinse with water. 3. Wipe gently with a soft-bristled toothbrush or toothpaste with a scouring pad to remove scale and oil stains and keep the faucet surface clean and bright. 4. Many people only notice the surface of the faucet when cleaning the faucet, but in fact the interior of the faucet is more important. If the water output of the faucet decreases or the water output forks, it may be caused by the blocker of the bubbler. The bubbler can be removed, soaked in vinegar, cleaned with a small brush or other tools, and then reinstalled. Deuxième, the faucet maintenance method 1. Do not turn the faucet too hard, just turn it gently. Even traditional faucets do not need to be screwed to death. In particular, do not use the handle as an armrest to support or use it. 2. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretch state, and do not coil it on the faucet when not in use. En même temps, when using or not using, pay attention not to form a dead angle at the joint of the hose and the valve body, so as not to break or damage the hose. 3. Under the condition that the water pressure is not less than 0.02mpa (ie 0.2kgf / cm2), after a period of use, if the water output is reduced, or even the water heater is turned off, you can light it at the outlet of the faucet Gently unscrew the screen cover to remove impurities, and generally recover as usual. 4. Ask experienced and qualified professionals for construction and installation. When installing, the faucet should try not to bump with hard objects, and do not leave cement, glue, etc.. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the sundries in the pipeline before installing the faucet. 3. Precautions for faucet cleaning Although the chrome-plated layer of the faucet claims to be corrosion-resistant and not rusty, the incorrect cleaning method will still cause abnormal wear of the faucet. 1. Do not wipe the surface of the faucet with a hard object such as a steel ball, because the steel ball is very hard and it is easy to scratch the surface of the faucet. 2. It is best to use a neutral cleaning agent for cleaning, and the strong acid and alkaline cleaning agent is not suitable for cleaning with a faucet. 3. After the faucet is cleaned, the remaining water on the surface should be dried with a dry, lint-free towel to avoid residual water stains. The above is the content of the faucet cleaning and maintenance methods introduced by the editor of China Faucet Industry Network. I hope it will help you.