How to choose a shower

Selection of showers

Well-designed showers ensure that the amount of water dispensed per nozzle is essentially the same,showers must be seen when choosing a shower. The water saving function is the key point to consider when purchasing a shower. Some showers use a steel ball valve core with a regulating water heater to adjust the inflow of hot water into the mixing tank,so that the hot water can flow out quickly and accurately. This shower of design can save 50% water more than the ordinary shower.

We have better to make the shower tilt out of water when selecting. If the water at the top of the nozzle is obviously small or not, the internal design of the shower is very general. Even if there are various water discharge methods such as lasing and spraying, the user may not get the corresponding experience.

Olandelayo,check the nozzle,whether the shower is easy to clean.The water outlet plugging of the shower is often caused by the accumulation of impurities in the screen cover. It is inevitable that the shower will be deposited after a long time used. If it can’t be cleaned,some of the nozzle holes may be blocked. In order to avoid the blockage of the water outlet due to the poor water quality. The nozzle of the well-designed shower heads are often prominent and easy to clean, or the nozzles are make of silicone. It just use a rag or hand, the scale can be removed easily. Some showers also have the function of automatically removing scale. You can ask more information before you buy the shower.

Look at the coating and the valve core, in general, the brighter of the shower surface,the better the coating process. The good valve core is made of ceramic with high hardness. It is smooth and wear-resistant, so as to prevent the leakage of dripping. Consumer must try to twist the switch, it is better not to buy if your feeling is bad.

FAQ about the shower

Question:What should I do if the water is not spray out, but pooling into water columns when I using the shower?

Answer: There are two reasons for this problem. First, the shower sprinkler is adjustable, you just rotate the shower head to adjust it.If it is not caused by too much dirt in the nozzle, just open the shower head and clean it.

Supplement:There are several types of shower spray out with adjustment function. Adjusting the adjustment plate to switch the function.

Shower maintenance skills

The shower should be install by the professionals.Avoid any damage during installation.Clean the pipe before installation is very important.

Use the shower with the water pressure is not less than 0.02 mPa for a long time.If the amount of water is found to decrease,or even the water heater is turned off, just clean the screen cover but remember not to force the shower.

Don’t be rude when switching the shower faucet. Even the traditional faucets, just switch it gently.Don’t use the faucet handle or shower bracket as armrests.

The flexible hose of the bathtub shower head should be kept in a natural stretch.Don’t coil it on the faucet when not in use.Be careful not to form a dead angle at the joint between the host and the faucet to avoid breaking or damaging the hose.